| Parameter |
Value |
| Period t1 – t4 |
- Pulse length 10 ns to 1000 s
- Time delay 0 to 1000 s
- Resolution 10 ns
- Precision typ. 5 ns ± 100 ppm
|
| Input TRIG/GATE |
- Trigger level 0.2 to 24.0 V (+- 0.2 V + 3%)
- Impedance 5.4 kOhm
- Termination 50 Ohm
- Jitter typ. < 10 ns (RMS)
|
Outputs (Ch A – Ch D)
|
- Switchable output level 3.3 / 5 V for each channel
- Impedance 50 Ω
|
| Communication |
- USB – Open communication over the serial line using SCPI
- Optional: Binary commands over RS485. Enables full synchronization of multiple DDGs.
|
| Output mode |
- Continuous, Single shot, Burst mode, Duty cycle
|
| Mechanical mounting |
- Aluminium box, WxHxD 130x75x190 mm; Weight 1 kg
- Optionally: Eurocard 100 x 160 mm, 8HP
|
| Input voltage |
- 12–26 V DC, connector 5,5×2,5mm
|
| Power consumption |
|
| Operating temperature |
- 5 – 35 °C, non-condensing
|
| Special features |
- DDG’s are chainable – it is possible to arm channels of multiple DDG’s synchronously on the common control bus (requires RS485).
- Non-box version fits into the subrack format, height 3U, width 8HP.
- Control the DDG from your application written with C/C++, C#, Java, LabView, etc.
|
